Cable Routes - Huawei NetCol8000-A013 User Manual

NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (800 mm Width)
Figure 3-36 Connecting teamwork cables
Connecting Monitoring Network Cables
NetCol8000-A013 supports RS485 monitoring.
●
●
Considering the monitoring speed, it is recommended that An be less than or
equal to 8.
Figure 3-37 Connecting RS485 monitoring cables

3.11.6 Cable Routes

The following figure shows how to route the power cables and the signal cable
between the indoor and outdoor units from the bottom.
Issue 06 (2022-11-25)
If there is no teamwork networking, connect the smart cooling products
hand-in-hand and connect the CN17 port on the first smart cooling product
to the monitoring device. An ≤ 255.
If there is teamwork networking, connect the CN17 port on the first air
conditioner in the teamwork group to the monitoring device. An ≤ 32.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
57