Huawei NetCol8000-A013 User Manual page 23

NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (800 mm Width)
Appearance
Figure 2-5 Appearance introduction
(1) Air exhaust vent
(4) Holes
Cooling Components
The indoor unit consists of cooling components such as the DC fan, evaporator,
electronic expansion valve (EEV), electric heater (optional), wet film humidifier
(optional), and stop valve.
●
●
●
●
Issue 06 (2022-11-25)
DC fan
The DC centrifugal fan is used, which supports stepless speed adjustment.
Evaporator
The evaporator adopts the inner threaded copper pipes and blue hydrophilic
aluminum foil to prevent water blowing due to condensate water
accumulation and improve heat exchange performance. The evaporator
adopts the I-shaped design, which features small wind resistance and high
sensible heat ratio.
EEV
The throttling device is a name-brand EEV. The system controls the EEV to
quickly and accurately adjust the refrigerant volume based on the
temperature and humidity requirements. In this way, system stability and
reliability can be ensured, and balanced temperature and humidity can be
achieved in the equipment room.
Electric heater
Copyright © Huawei Technologies Co., Ltd.
(2) LCD
(5) Key hole
2 Overview
(3) Air return vent
16