Component Commissioning - Huawei NetCol8000-A013 User Manual

NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (800 mm Width)
Procedure
Step 1 Choose Comm Setting from the user menu, and tap
communication setting screen.
Figure 4-8 Communication settings
Step 2 Set the Baud Rate, Comm Address, and Enable Monitoring Resistor based on
the actual situation.
Table 4-5 Communication settings
Parameter
Baud Rate
Comm Address
Enable Monitoring
Resistor
----End

4.6 Component Commissioning

Context
●
Issue 06 (2022-11-25)
Remove the refrigerant cylinder after ensuring that no more refrigerant needs
to be charged.
Copyright © Huawei Technologies Co., Ltd.
Description
Set the baud rate as
required. The value
should be consistent
with that set on the
NMS.
The communications
address in one RS485
NMS must be unique,
which is irrelevant to the
cable connection
sequence or teamwork
address.
In an NMS, the values
for the first and last
smart cooling products
by cable routing are
"Yes".
4 Power-On Commissioning
to access the
Default Value
9600
1
No
76