Oem Softener System Setup - Excalibur Water Systems Progressive Flow SC1 Series Installation And User Manual

SOFTENER INSTALLATION AND USER GUIDE
OEM Softener System Setup
BARRIE • ONTARIO • CANADA TF: 705.733.8900 WWW.EXCALIBURWATER.COM
Step 1S ‐ Press NEXT and ▼ simultaneously for 5 seconds and
release.
Step 2S – Choose SOFTENING using ▲ or ▼. Press NEXT to go to
Step 3S. Press REGEN to exit OEM Softener System Setup.
Step 3S – Choose Downflow Brining Direction using ▲ or ▼. This
screen is not viewed when Step 2S is set to Filtering. Press NEXT to
go to Step 4S. Press REGEN to return to previous step.
Step 4S – Set "Post" Refill location using ▲ or ▼to refill the brine
tank after the final rinse.
Press NEXT to go to Step 5S. Press REGEN to return to previous step.
Step 5S – Select the time for the first backwash cycle using ▲ or ▼.
Press NEXT to go to Step 6S. Press REGEN to return to previous step.
Step 6S – Select the time for the brine cycle using ▲ or ▼.
NOTE: The display will flash between cycle number and time, and
brine direction (UP or dn).
Press NEXT to go to Step 7S. Press REGEN to return to previous step.
15