Installer Display Settings - Excalibur Water Systems Progressive Flow SC1 Series Installation And User Manual

SOFTENER INSTALLATION AND USER GUIDE
Installer Display Settings
Exit Installer Display Settings
BARRIE • ONTARIO • CANADA TF: 705.733.8900 WWW.EXCALIBURWATER.COM
Step 1I ‐ To enter Installer Display press NEXT and ▲ simultaneously
for about 5 seconds and release.
Step 2I – Hardness: Set the amount of influent hardness using ▲ or
▼. If "oFF" or a number was selected in Step 11S.
Press NEXT to go to step 3I. Press REGEN to exit Installer Display
Settings.
Step 3I – Day Override: Set "14" maximum number of days between
regenerations. Set Day Override using ▲ or ▼:
See Setting Options Table for more detail on setup.
Press NEXT to go to step 4I. Press REGEN to return to previous step.
Step 4I – Next Regeneration Time (hour): Set the hour of day for
regeneration using ▲ or ▼. The default time is 2:00.
Press NEXT to go to step 5I. Press REGEN to return to previous step.
Step 5I – Next Regeneration Time (minutes): Set the minutes of day
for regeneration using ▲ or ▼buttons.
Press NEXT to exit Installer Display Settings. Press REGEN to return
to previous step.
14