Installing The Tcp/Ip Protocol On Windows Nt - Epson GT-10000 User Manual

Installing the TCP/IP Protocol on
Windows NT 4.0
1. Double-click the
Control Panel. If necessary, click the
Protocols
2. Check that
the list of network protocols.
If it appears in the list, go to "Assigning
an IP Address" on page 105.
If you don't see
list, continue with the next step.
3. Click the
screen on the right.
4. Select
TCP/IP Protocol
5. Continue with the instructions in the
next section to assign an IP address.
104
Installing the TCP/IP Protocol
icon in the
Network
tab.
TCP/IP Protocol
TCP/IP Protocol
button. You see the
Add
and click
appears in
in the
.
OK