Installing The Tcp/Ip Protocol On Windows Nt 4.0 - Epson Expression 1680 User Manual

Installing the TCP/IP Protocol on
Windows NT 4.0
1. Open the Control Panel and
double-click the
necessary, click the
2. Check that
the list of network protocols.
If it appears in the list, go to "Assigning
an IP Address on Windows NT 4.0" on
page 141.
If you don't see
list, continue with the next step.
3. Click the
screen to the right.
4. Select
TCP/IP Protocol
5. Continue with the instructions in the
next section to assign an IP address.
140
Installing the TCP/IP Protocol
icon. If
Network
Protocols
TCP/IP Protocol
TCP/IP Protocol
button. You see the
Add
and click
tab.
appears in
in the
.
OK