Setting Up Client Computers; Installing The Software - Epson GT-10000 User Manual

Setting Up Client Computers

You can set up any Windows 98, Windows 95, or Windows NT 4.0 computer as a
client, as long as it is configured and operational on an existing network with TCP/IP
Protocol installed. To set up a client computer, you'll need to know the IP address or
host name of the scanner server. Also, make sure the TCP/IP Protocol is installed.
(See Appendix A, "Installing the TCP/IP Protocol," for instructions, if necessary.)

Installing the Software

You must install EPSON TWAIN Pro Network on the client computer before the
client can use the network scanner. You can install Presto! PageManager on up to six
computers. Your scanner comes with a single-user license for PhotoDeluxe and
TextBridge Pro. If you want to install these applications on additional computers,
please contact the software manufacturer to purchase a site license.
The following instructions are for Windows 98, Windows 95, and Windows NT 4.0:
1. Insert your scanner software
CD-ROM if it's not already in
your CD-ROM drive.
If you don't see the screen on
the right, double-click
Computer
then double-click the
Epson
If necessary, double-click the
Cdsetup.exe
2. Click
Add Software
72
Network Scanning
My
on your desktop,
CD-ROM icon.
icon.
.