Epson GT-10000 User Manual page 74

Follow the instructions below to automatically install your EPSON GT-10000
scanner driver and other software on your scanner software CD-ROM. Before you
begin, make sure you recalibrate your monitor to factory specifications. (See your
manufacturer's documentation for instructions.)
You may be asked to insert your Windows CD-ROM during this procedure. Make
sure you have your Windows CD-ROM available, or know where to find the
Windows source files on your hard drive. If you need help locating your source files,
contact your computer manufacturer.
1. Make sure your SCSI board and SCSI driver are installed and the scanner is
connected to your computer.
2. Turn on your scanner first, then turn on your computer.
3. Log onto Windows NT and insert your EPSON GT-10000 Scanner Software
CD-ROM in your drive.
4. When you see the EPSON
Software Setup window, click
Add Software
If you don't see the screen on
the right, double-click
Computer
then double-click the
Epson
If necessary, double-click the
Cdsetup.exe
5. Select
EPSON Scan Server
(A check mark appears beside
selected applications.) Click to
select other software you want to
install, or deselect software that
you don't want. Then click
68
Network Scanning
.
My
on your desktop,
CD-ROM icon.
icon.
.
OK
Select EPSON TWAIN Pro if you want to scan from the
EPSON GT-10000 connected to your computer. Only install
EPSON TWAIN Pro Network if you want to access a network
scanner connected to another computer.
.