Epson GT-10000 User Manual page 76

9. Follow the instructions on the screen to
install EPSON Scan Server. When you
see the window on the right, make sure
GT-10000
Selection.
Select either
scanner server start up mode. (See
"Changing the Scanner Server Start Up
Mode" on page 71 for details about the
start up mode.)
10. Click
Test
OK. Scanner available
Status if the scanner is communicating
with the scanner server. Click
the window.
11. Follow the instructions on the screen to complete installation of any other
software you've selected in the EPSON Software Setup window. If you're done
installing software, restart your computer.
If you want to install PhotoDeluxe and TextBridge Pro, see page 33 for instructions.
70
Network Scanning
is selected under Scanner
or
Icon Dialogbox
to test scanner operation.
appears under
OK
If you want to share a different network scanner with the
client computers, you can access the EPSON Scan Server
window at any time by double-clicking the EPSON Scan
Server icon in the Windows Control Panel. Then select the
scanner you want in the Scanner Selection list.
as the
to close