Epson GT-10000 User Manual page 109

When you have your IP address, follow the steps below to assign it to your computer.
1. Select on the list of
TCP/IP
installed network components,
and then click the
button. If necessary, click the
tab.
Address
2. Click
Specify an IP address
and then enter the IP address
and subnet mask.
If you're using a DHCP server on your network, you can
assign an IP address automatically by selecting Obtain an IP
address automatically and clicking OK.
3. Click to close the TCP/IP Properties window, then click
OK
the Network window and have your IP address assignment take effect.
Make sure you share the IP address for the scanner server with all client computers on
the network.
Properties
IP
,
again to close
OK
Installing the TCP/IP Protocol
103