Installing The Tcp/Ip Protocol On Windows Nt 4.0 - Epson Expression 1640XL User Manual

Installing the TCP/IP Protocol on
Windows NT 4.0
1. Double-click the
Control Panel. If necessary, click the
Protocols
2. Check that
the list of network protocols.
If it appears in the list, go to "Assigning
an IP Address on Windows NT 4.0" on
page 159.
If you don't see
list, continue with the next step.
3. Click the
screen to the right.
4. Select
TCP/IP Protocol
5. Continue with the instructions below to
assign an IP address.
158
icon in the
Network
tab.
TCP/IP Protocol
TCP/IP Protocol
button. You see the
Add
and click
appears in
in the
.
OK