Installing The Scsi Software; Installing The Scsi Software For Windows 98 And Windows 95 - Epson GT-10000 User Manual

4. Plug in the power cables for your computer, scanner, and other external
SCSI devices.
Always turn on your scanner first. Otherwise, the computer may not recognize your
EPSON scanner when you install your software.

Installing the SCSI Software

Your scanner software CD-ROM includes the Windows 98, Windows 95, and
Windows NT 4.0 drivers for your SCSI board. You need to install the SCSI software
for your system before you can use your scanner.
Before you begin, make sure your SCSI interface board is installed, and your scanner
is connected to the computer. If you have already installed a SCSI interface board in
your PC, and have installed the SCSI software, go to one of the following sections to
install your scanner software for your system:
"Installing the Software for Windows 98" on page 19.
"Installing the Software for Windows 95" on page 24.
"Installing the Software for Windows NT 4.0" on page 29.
Installing the SCSI Software for Windows 98 and
Windows 95
Depending on how your computer system was originally set up, the SCSI driver may
be installed automatically when you start your computer.
If your system doesn't automatically detect the SCSI board, run EZ-SCSI, a special
Windows SCSI configuration utility. Insert your EPSON GT-10000 Scanner
Software CD-ROM in your drive. The EPSON Software Setup window should
appear. Click
the folder, then double-click the
Ezscsi
14
Setting Up Your Scanner
, then double-click the
Browse this CD Adaptec
icon to run the program.
Setup.exe
folder. Double-click