Installing The Software For Windows 98 - Epson GT-10000 User Manual

Installing the Software for Windows 98

This procedure automatically installs your EPSON TWAIN Pro driver for
stand-alone scanning. Follow the instructions in this section to install your EPSON
GT-10000 scanner driver and other software on your scanner software CD-ROM.
Before you begin installing software, make sure you recalibrate your monitor to
factory specifications. (See your monitor documentation for instructions.)
If you want to use your scanner on a network, go to Chapter 5, "Network
Scanning," instead.
Installing the Scanner Driver
You may be asked to insert your Windows CD-ROM during this procedure.
Make sure you have your Windows CD-ROM available, or know where to find the
Windows source files on your hard drive. If you need help locating your source files,
contact your computer manufacturer.
1. Make sure your SCSI board and SCSI driver are installed and the scanner is
connected to your computer.
2. Turn on the scanner first, then
turn on your computer. When you see
the window on the right, click
(The Wizard may also say it has found
an unknown device.)
.
Next
Setting Up Your Scanner
19