Epson GT-10000 User Manual page 34

5. Click
Test
the scanner software is installed correctly,
you see
Status: Device Ready
Scanner Information. Click
the window.
You can test your scanner connection at
any time. (Double-click the
TWAIN Pro
Control Panel to open the EPSON
TWAIN Pro window. Then click the
button.)
Test
6. When you see the Screen Calibration
window, move the slider right or left until the
stripes match as closely as possible. (The stripes
will not match perfectly.) Then click
The EPSON Screen Calibration Utility
calibrates the preview image you see in your
EPSON TWAIN Pro driver to match your
monitor settings.
7. Follow the instructions on the screen to install Presto! PageManager and
Acrobat Reader.
28
Setting Up Your Scanner
to check the connection. If
OK
EPSON
icon in your Windows
You won't need to change the screen calibration as long as
you continue to use the same display. If you need to
recalibrate your screen at a later time, double-click the
EPSON TWAIN Pro icon in your Windows Control Panel to
open the EPSON TWAIN Pro window. Then click the Screen
Calibration Utility button at the bottom of the window.
under
to close
.
OK