Initialization Methods; Optional Automatic Document Feeder; Basic Specifications - Epson GT-10000 User Manual
Color scanner
Hide thumbs
Also See for GT-10000:
- User manual (104 pages) ,
- Product information manual (9 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Initialization Methods
The scanner can be initialized (returned to a fixed set of conditions) in these ways:
Type
Hardware initialization
Software initialization
Optional Automatic Document Feeder
Basic Specifications
Type:
Document feeding:
Document replacement time:
Multiple sizes:
Noise:
Reliability:
112
Specifications
Method
When the scanner is turned on
When the scanner receives a SCSI Reset signal
from the SCSI interface
When the software sends the ESC @ (initialize
the scanner) command
When the scanner receives a SCSI Bus Device
Message
Page feeding and duplex scanning with
automatic reverse
Pages are center aligned, fed face up from the
bottom of the stack, and ejected face up
1.2 seconds (Letter/A4 landscape)
Unavailable; all documents in a stack must be
the same size
50 dB or less
100,000 sheet paper feeding life
100,000 sheet paper ejecting life
100,000 hinge closings
Advertisement
Table of Contents
