Chapter 7 Maintaining And Transporting Your Scanner; Replacing The Fluorescent Lamp; Transporting The Scanner - Epson GT-10000 User Manual

Replacing the Fluorescent Lamp

The luminosity of the fluorescent lamp declines over time. If the lamp breaks or
becomes too dim to operate normally, the scanner stops working and both the
READY and ERROR lights flash. If this happens, the lamp assembly may need to be
replaced. Contact your local EPSON Customer Care Center. (See "Where To Get
Help" on page 96.)

Transporting the Scanner

If you need to transport the scanner or store it for an extended period, you must
secure the carriage beforehand. Turn on the scanner and wait until the carriage moves
to the home position (the left side). Then turn off the scanner.
Turn the transportation lock to the locked position to secure the carriage.
100
Maintaining and Transporting Your Scanner
Never open the case of the scanner. If you think repairs or
adjustments are necessary, consult your EPSON Customer
Care Center.
locked position
If the scanner is inoperable, the carriage may not
automatically return to the home position. If it doesn't, raise
the right side of the scanner and hold it up until the carriage
comes to rest at the left side. Then turn the transportation
lock to the locked position.