Installing The Software In Windows Nt 4.0 - Epson FILMSCAN 200 User Manual

Installing the software in Windows NT 4.0

Make sure that the film carrier contains film as described on
page 3-2 and is loaded in the scanner; then follow the steps
below to install the scanner software for Windows NT 4.0.
1. Turn on the computer. Start Windows NT 4.0.
2. Insert the scanner software CD shipped with your scanner
in the CD-ROM drive.
3. Double-click the My Computer icon.
4. Double-click the CD-ROM drive icon. You see the EPSON
folder.
5. Double-click the EPSON folder and double-click Disk 1. Then
double-click the SETUP.EXE icon. Follow the instructions on
the screen.
Note:
If the folder contains a README file, double-click it and read it.
This file contains the latest important information and any
updates regarding the application.
When you see the following EPSON TWAIN Setup dialog
box. Follow the steps on page 3-5 from step 6.
Setting Up the Scanner Software
3
3-9