Epson GT-10000 User Manual page 98

The colors in your scanned image
look strange, or look different
than the colors in the original
document
Run the EPSON Screen
Calibration Utility.
Make sure the Image Type and
Destination settings are correct.
Try different combinations of
gamma and color settings in
your scanner software.
If you're using an automatic
document feeder, make sure it's
closed when scanning.
Make sure
deselected in the Destination
window.
Printed colors will not match
the colors on your monitor
exactly, since printers and
monitors use different color
systems.
Moiré (cross-hatch) patterns
appear in the image when you
perform halftone scanning
Make the image size slightly
smaller.
Use a transparent sheet between
the document and the
document table to defocus the
image.
92
Solving Problems
is
Unsharp Mask
Reposition the document on the
document table. If necessary,
position the document at a
slight angle.
Select
24-bit Color
as your Image
De-screening
Type, or select
On
in the Image
De-screening
Type window.
Make sure
Unsharp Mask
deselected in the Destination
window.
You can't print scanned images,
or the printed image looks
garbled
Make sure your printer is
securely connected to your
computer and that you're using
the correct cable.
Make sure the correct printer is
selected in your application.
A line of dots is always missing
from the image
When a line of dots is missing
from the scanned image on your
screen, the scanner sensor has
malfunctioned. Contact your
dealer.
When a line of dots is missing
from your printouts, your print
head has malfunctioned. See
your printer manual.
for
is