Appendix A Installing The Tcp/Ip Protocol; Installing The Tcp/Ip Protocol On Windows 98 And Windows 95 - Epson GT-10000 User Manual
Color scanner
Hide thumbs
Also See for GT-10000:
- User manual (104 pages) ,
- Product information manual (9 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Installing the TCP/IP Protocol
To use your EPSON GT-10000 as a network scanner, the computers must be
configured and operational on an existing network with TCP/IP Protocol installed.
In addition, both the scanner server and client computers must have an IP address
assigned.
If you're running DHCP and WINS, or if you have a DNS
server, you may find it easier to use a host name rather than
an IP address to identify the scanner server. To specify a host
name, you must enable DNS. See your Windows
documentation for instructions.
Installing the TCP/IP Protocol on
Windows 98 and Windows 95
1. Double-click the
Control Panel. If necessary, click the
Configuration
the right.
2. Check that
TCP/IP
installed network components.
If it appears in the list, go to "Assigning an IP
Address" on page 102.
If you don't see
with the next step.
3. Click the
Add
icon in the
Network
tab to display the screen on
appears in the list of
in the list, continue
TCP/IP
button.
Appendix A
101
Advertisement
Table of Contents
