Epson GT-10000 User Manual page 46

Before loading the ADF, make sure the document:
Has no wet ink on it.
Has no holes.
Is not ripped or wrinkled.
Has no staples or other objects attached that may damage the feeder.
Has no folds.
Is not a multipart form.
Is not bound.
Has no carbon coating.
Has no cut-out areas.
How you load your document depends on the scanner driver you use. Follow these
guidelines when you place your document in the ADF:
Type of
document
One-sided
document
Two-sided
document
40
Using the Optional ADF
Using the EPSON TWAIN Pro driver
Place the document stack face up,
bottom edge first (or left edge first, if your
document is in landscape orientation).
ADF - Single-sided
Use the
your Document Source.
Place the document stack face up,
bottom edge first (or left edge first, if your
document is in landscape orientation).
ADF - Double-sided
Use the
your Document Source.
When scanning high-quality color or halftone documents, it's
best to open the ADF and scan documents manually.
Don't open the ADF while scanning. You'll get an option error
and possibly a paper feeding error. Always close the ADF
before scanning or using the feeder.
Using the ISIS driver
Place the document stack
face down, bottom edge first.
Use the 1 to N setting.
setting as
Place the document stack
face down, bottom edge first.
Use the 1 to N setting.
setting as