Installing the TCP/IP Protocol on
Windows NT 4.0
1. Open the Control Panel and double-click
the
Network
Protocols
2. Check that
the list of network protocols.
If it appears in the list, go to "Assigning
an IP Address on Windows NT 4.0" on
page 127.
If you don't see
list, continue with the next step.
3. Click the
screen on the right.
4. Select
TCP/IP Protocol
5. Continue with the instructions in the
next section to assign an IP address.
126
Installing the TCP/IP Protocol
icon. If necessary, click the
tab.
TCP/IP Protocol
TCP/IP Protocol
button. You see the
Add
and click
appears in
in the
.
OK