Epson GT-10000 User Manual page 21

If the SCSI driver wasn't automatically installed, and EZ-SCSI fails to find the driver,
follow the steps below. You may be asked to insert your Windows operating system
CD-ROM during software installation. Please have your Windows CD-ROM handy,
in case it is needed.
1. Turn on your scanner first, then turn on your computer. A message appears
saying that your system has detected new hardware.
2. Click . You see the screen to
Next
the right.
3. Make sure
Search for the best
driver for your device
Insert the scanner software
CD-ROM in your drive, then
click .
Next
4. When you see the screen on the
right prompting you for the location
of the driver, check
. Browse to the following
location
location on the CD-ROM:
Adaptec\Ezscsi
(The example screen shows D as the
CD-ROM drive letter; your
CD-ROM drive letter may be
different.)
is selected.
Specify a
. Then click .
Next
Setting Up Your Scanner
15