System Requirements - Epson GT-10000 User Manual

Do not attempt to service the scanner yourself.
Unplug the scanner and refer servicing to qualified service personnel under the
following conditions: if the power cord or plug is damaged; if liquid has entered
the scanner; if the scanner has been dropped or the cabinet damaged; if the
scanner does not operate normally or exhibits a distinct change in performance.
Do not adjust controls that are not covered by the operating instructions.

System Requirements

The minimum system requirements for Windows are listed below. For optimum
performance, a faster processor and more memory are recommended. If you are
scanning high-resolution images, you need more than the minimum available hard
disk space listed.
An IBM-compatible PC with a 486/66 MHz or faster processor (Pentium
recommended).
Microsoft Windows 95, Windows 98, or Windows NT 4.0 (Service Pack 3).
16MB RAM for Windows 95 and Windows 98, 32MB RAM for Windows NT
(32MB RAM recommended for all systems).
50MB available hard disk space.
PCI slot for the Adaptec SCSI card (included with your scanner).
CD-ROM drive and mouse or pointing device.
VGA color monitor with 640 480 or higher resolution (a color monitor with a
resolution of 800 600 or higher recommended).
8-bit, 256-color display adapter card (24-bit display adapter card with millions of
colors recommended).
116
Notices
On-screen color and tone reproduction are subject to the
display capability of your computer system, including the
video card, monitor, and software. See the documentation
for these products for details.
®