Table of Contents
Advertisement
Operating
8.8 Operating the Service menu
The charging station deactivates the alarm. In the "Status" column, the status value "(I)O" is
displayed for the deactivated alarm. The charging station continues the interrupted charging
process.
Note
Alarm that cannot be deactivated
If the charging station does not deactivate the alarm after pressing the "Acknowledge alarm"
button, the cause of the alarm still exists.
• Also, observe the safety instructions in the general chapter Safety instructions (Page 121)
and the safety instructions for operation (Page 9).
• Then check again whether you can eliminate the cause of the alarm.
• If you cannot eliminate the cause of the alarm, contact Technical Support.
8.8.4
Displaying information about the charging station
In the "Charger Info" menu, the charging station displays the current voltage and current values
of the power supply.
Requirements
• You have opened the Options menu.
• You have pressed the "Charger Info" button in the Options menu.
136
SICHARGE UC 100, UC 200, UC 300, UC 400, UC 600, UC 800
Operating Instructions, 10/2022, A5E50828019-AC
Advertisement
Table of Contents
