Siemens SICHARGE UC 100 Operating Instructions Manual page 67

Drill holes for fastening points
The following figure shows the dimensions of the holes for fastening the charging unit.
Figure 4-19 Fastening points
On each side, screw the charging station to the foundation in at least 2 of the 3 holes.
Screws for securing the charging station
To attach the charging station to the base area (Page 81), you need the following fasteners:
• 6 M18 screws
• 6 M18 washers
• 6 fastening elements, for example: Dowel
SICHARGE UC 100, UC 200, UC 300, UC 400, UC 600, UC 800
Operating Instructions, 10/2022, A5E50828019-AC
Application planning
4.4 Application planning of UC 300/400
65