Replacing Consumables; Replacing Ink Cartridges - Epson Stylus Pro 4900 User Manual

Epson Stylus Pro 4900/4910

Replacing Consumables

Replacing Ink Cartridges

If one of the installed ink cartridges is expended,
printing cannot be performed. If an ink low warning is
displayed, we recommend replacing the ink cartridge(s)
as soon as possible.
If an ink cartridge runs out while printing, you can
continue printing after replacing the ink cartridge.
However, when replacing ink during a print job, you
may see a difference in color depending on the drying
conditions.
Supported ink cartridges U
Consumable Products" on page 151
How to replace
The following procedure uses Matte Black ink as an
example. You can use the same procedure to replace all
ink cartridges.
Note:
Epson recommends the use of genuine Epson ink
cartridges. Epson cannot guarantee the quality or
reliability of non-genuine ink. The use of non-genuine
ink may cause damage that is not covered by Epson's
warranties, and under certain circumstances, may cause
erratic printer behavior. Information about non-genuine
ink levels may not be displayed, and use of non-genuine
ink is recorded for possible use in service support.
A
Make sure the printer is on.
User's Guide
Maintenance
"Options and
B
Open the cartridge cover.
Press the groove in the cartridge cover to open
the cover.
C
Push the ink cartridge you want to replace into
the printer.
You will hear a click and the ink cartridge pops
out slightly.
D
Carefully pull the cartridge straight out of the
slot.
120