Cutting The Roll Paper - Epson Stylus Pro 4900 User Manual

Epson Stylus Pro 4900/4910
J
Slide out the output tray to the second and third
extensions.
Do not raise the flap. If the flap is raised while
printing, the paper may not be ejected correctly.
Note:
❏ The output tray can only hold one sheet of roll
paper at a time. Remove each sheet of roll
paper as it is ejected without letting the sheets
stack up on the output tray. Also, do not allow
cut sheets and roll paper to stack up together.
❏ Do not raise the flap when Roll Paper / No Cut
is set from the Paper Type menu or while
performing banner printing. If the flap is
raised while printing, the paper may not be
ejected correctly.
K
Set up the paper eject support depending on the
paper type.
Set up the paper eject support when plain paper is
loaded.
User's Guide
Basic Operations
31
Tip:
When Auto Roll Feeding is set to On in the Menu, and a
paper cassette is specified from the printer driver, the roll
paper automatically returns to its stand by position and
the cut sheet is fed and printed from the paper cassette
even if roll paper was loaded on the printer; however, if
roll paper is specified from the printer driver in a
subsequent job, the roll paper is automatically fed and
printed.
The factory setting for Auto Roll Feeding is On.

Cutting the roll paper

After printing, you can cut the roll paper by one of the
following two methods. You can specify the method
either from the control panel or the printer driver.
However, when printing from the printer driver, the
printer driver settings are given priority regardless of
the settings on the control panel.
❏ Auto cut:
Cut the roll paper after printing each page
automatically using the built-in cutter.
❏ Manual cut:
Press the X button to cut the roll paper with the
built-in cutter, or use a cutter sold at a store.
Tip:
❏ Some of the roll paper may not be cut using the
built-in cutter. Use a cutter sold at a store to cut the
paper.
❏ It may take a while to cut the roll paper.
Setting methods
Setting on the computer
Set Auto Cut from the Main screen - Roll Paper Option
in the printer driver's Properties (or Print Preferences)
screen.
Setting from the printer
Press the l button on the control panel to display the
Paper Type menu, and then select it.
"Control panel" on page 13
U