Epson Stylus Pro 4900 User Manual page 33

Epson Stylus Pro 4900/4910
Note:
Always check that the roll paper is rewound before
removing the spindle.
If the roll paper is not rewound, the spindle may be
locked. If you try to remove the spindle when it is
locked, the printer could be damaged.
Tip:
When removing the roll paper, you can use the
optional roll paper belt to prevent the roll paper
from unwinding.
E
Remove the black flange from the spindle.
While holding the black flange as shown in the
illustration, push the end of the spindle to pop the
flange off the spindle.
If the flange does not come off easily, lightly tap
the end of the spindle on the black flange side.
When removing a flange from the spindle while
only the paper core is left on it, hold the core and
push the spindle.
User's Guide
Basic Operations
33
Note:
When removing the roll paper, do not knock the
right side of the spindle (the gray flange side) hard
against the floor.
The right side of the spindle may be damaged by the
impact.
F
Remove the roll paper from the spindle.
After rewinding the roll paper carefully, store it
in the original package.
If you are not loading another roll paper, attach
the black flange to the spindle, load it in the
printer, and then close the roll paper cover.