Setting Procedures For Printing - Epson Stylus Pro 4900 User Manual

Epson Stylus Pro 4900/4910

Setting Procedures for Printing

Making Settings in Windows
A
When the printer driver's Main screen is
displayed, you can configure various settings
required for printing such as Media Type,
Source, Page Size.
"Basic Printing Methods(Windows)" on
U
page 43
B
Select Borderless, and then click Expansion.
C
Select Auto Expand or Retain Size as the
Method of Enlargement. If you select Auto
Expand, set how much of the image goes beyond
the edge of the paper as shown below.
Max : 3 mm for left and 5 mm for right
(the image shifts 1 mm to the
right)
Standard : 3 mm for left and right
User's Guide
Printing Varieties
71
Min : 1.5 mm for left and right
Tip:
Moving the slider towards Min decreases the image
enlargement ratio. Therefore, some margins may
appear at the edges of the paper depending on the
paper and printing environment.
D
When printing on roll paper, click Roll Paper
Option, and select the Auto Cut setting.
"About Roll Paper Cutting" on page 70
U
E
Check other settings, and then start printing.
Making Settings for Mac OS X
A
Open the Print screen and select the paper size
from the Paper Size option, and then select a
borderless printing method.
"Basic Printing Methods(Mac OS X)" on
U
page 44
The selections for borderless printing methods
are displayed as shown below.
XXXX (Roll Paper - Borderless (Auto Expand))
XXXX (Roll Paper - Borderless (Retain Size))
XXXX (Sheet - Borderless (Auto Expand))
XXXX (Sheet - Borderless (Retain Size))
Where XXXX is the actual paper size, such as A4.