Epson Stylus Pro 4900 User Manual page 16

Epson Stylus Pro 4900/4910
D
SpectroProofer Usage Status
The following icons indicate the installation status of
the optional SpectroProofer.
: Installed.
No icon : Not installed, or it is not installed
correctly.
E
Type of black ink
Displays the selected type of black ink.
F
Maintenance Box Status
The status of Maintenance Box 1 and 2 is indicated as
follows.
: There is enough space in the maintenance
box.
: The Maintenance Box is nearing the end
of its service life. You need to prepare a
new Maintenance Box. (flashing)
: Maintenance Box is at the end of its
service life. Replace the Maintenance Box
with a new one. (flashing)
Tip:
You can check the remaining space more reliably in
Printer Status from the Menu, or from EPSON Status
Monitor in the printer driver. We recommended
checking the remaining space before power cleaning and
so on, and preparing a new Maintenance Box if it is
nearing the end of its service life.
"Printer Status menu" on page 106
U
Windows U "Summary of the Utility Tab" on
page 55
Mac OS X U "Using Epson Printer Utility 4" on
page 58
User's Guide
Introduction
16
G
Remaining Paper
The following icons indicate the remaining amount
of loaded paper.
One of the following icons is displayed depending on
whether roll paper or cut sheet is set as the paper
source.
: The amount of remaining roll paper
(length) is indicated after the icon. This is
displayed only when Remaining Paper
Setup is set to On.
"Printing and Reading Roll Paper
U
Information" on page 26
: The amount of remaining paper (number
of sheets) in the paper cassette is indicated
after the icon. This is displayed only when
Cut Sheet Remaining is set to On in the
Maintenance Mode menu and Cut Sheet
Remaining is set from the Menu.
"Maintenance Mode" on page 159
U
"Paper Setup menu" on page 106
U
H
Roll Paper Margin Parameter
The following Roll Paper Margin settings from the
Menu are displayed after the
Auto : Default
15 mm : Top/Bottom 15mm
35/15 mm : Top 35/Bottom 15mm
3 mm : 3mm
15 mm : 15mm
"Printer Setup menu" on page 103
U
I
Platen Gap Settings/Custom Paper Registered
Number
❏
The following icons indicate the current Platen Gap
settings.
"Printer Setup menu" on page 103
U
No icon : Standard
icon.