Epson Stylus Pro 4900 User Manual page 15

Epson Stylus Pro 4900/4910
Displays the printer's status, operation, and error
messages.
"When an Error Message is Displayed" on
U
page 129
B
Paper Source Settings
The following icons indicate the paper source status
set by the l button.
You can also make the same settings from the printer
driver. When printing from the printer driver, the
printer driver settings are given priority regardless of
the settings on the control panel.
: Prints on roll paper and cuts
automatically after printing each page.
: Prints on roll paper but does not cut
after printing.
: Prints on cut sheets.
C
Ink Cartridge Status
Displays the approximate level of remaining ink and
the current status. The ink cartridge icons change as
follows when the ink is low or an error occurs.
Normal
1 Ink Slot Number
When facing the printer, the slots are numbered
from left to right in ascending order from 1. The
following shows the colors that correspond to the
ink slot numbers.
User's Guide
Introduction
Warning or Error
15
1 GR (Green)
2 LLK (Light Light Black)
3 Y (Yellow)
4 LC (Light Cyan)
5 VLM (Vivid Light Magenta)
6 OR (Orange)
7 MK (Matte Black)
8 VM (Vivid Magenta)
9 LK (Light Black)
10 C (Cyan)
11 PK (Photo Black)
2 Status indicators
The ink cartridge status is indicated as follows.
No alarm : There is sufficient ink and
printing is possible.
: Ink is low. You need to prepare a
new ink cartridge.
: An error occurred. Check the
message on the screen, and clear
the error.
3 Ink color codes
See the list in 1 (above) for the colors that corre‐
spond to the codes.
Tip:
You can check the remaining ink level more reliably in
Printer Status from the Menu, or from EPSON Status
Monitor in the printer driver. We recommended
checking the remaining ink level before printing a large
job, and preparing a new cartridge for any ink
cartridges that are running low.
"Printer Status menu" on page 106
U
Windows U "Summary of the Utility Tab" on
page 55
Mac OS X U "Using Epson Printer Utility 4" on
page 58