Printing On Custom Paper - Epson Stylus Pro 4900 User Manual

Epson Stylus Pro 4900/4910
J
After joining all of the sheets together, cut the
margins along the outer guide lines.
User's Guide
Printing Varieties
83

Printing on custom paper

You can also print on paper sizes that are not already
available in the printer driver. If you create and save a
user-defined paper size using the steps below, you can
select the saved paper size from Page Setup in the
application. If your application supports creating user
defined sizes, follow the steps below to select the same
size that was created in the application, and then print.
You can register the following sizes.
The minimum paper size supported by this printer is
203 (width) x 254 (length) mm. If you create a
user-defined paper size smaller than this minimum size,
you can print on paper that is larger than 203 (width) x
254 (length) mm, and then trim the margins to the size
you require.
Width 89 to 432 mm
*
Windows: 127 to 15000 mm
Length
Mac OS X: 127 to 15240 mm
* The paper length can be longer if using applications that
support banner printing. However, the actual print size
depends on the application, the paper size loaded in the
printer, and the computer environment.
Note:
❏ For Mac OS X Custom Paper Sizes, although you can
specify a large paper size which cannot be loaded on
this printer, it will not be printed properly.
❏ The available output size is limited depending on the
application.