Supported Media Sizes For Borderless Printing - Epson Stylus Pro 4900 User Manual

Epson Stylus Pro 4900/4910
❏ Retain Size
Create the print data larger than the paper size in
the applications to produce borderless output. The
printer driver does not enlarge the image data. Use
settings such as Page Layout in the applications to
set the size of the image data as follows.
- Create print data larger than its actual print size by 3
mm on the left and right (6 mm in total).
- If the application has margin settings, set the
margins to 0 mm.
- Make the image data as large as the paper size.
Select this setting if you want to avoid image
enlargement by the printer driver.
Supported Media Sizes for
Borderless Printing
The following media sizes are supported for borderless
printing.
User's Guide
Printing Varieties
69
The supported paper sizes vary depending on if you are
using roll paper or cut sheets.
Supported paper widths
A4/210 mm
A3/297 mm
Super A3/B/329 mm
SuperW A3/329 mm
*
A2/420 mm
*
US B/11 inch
US C/17 inch
*
8 inch
10 inch
16 inch
30 cm
* You can perform borderless printing only when using the
borderless printing spacer supplied with the printer and
printing on roll paper with a 2 inch paper core. U
"Removing and installing the spacer" on page 28
Depending on the media type, the print quality may
decline or borderless printing cannot be selected.
"Epson Special Media Table" on page 153
U
Roll Cut
paper sheet
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓
-
✓
-
✓ ✓
✓
-
✓ ✓
✓ ✓
✓ ✓