Printable Area; Roll Paper Printable Area; Cut Sheets Printable Area - Epson Stylus Pro 4900 User Manual

Epson Stylus Pro 4900/4910

Printable area

This section describes the printable areas for the printer.
If the margin set in an application is larger than the
following setting values, sections beyond the specified
margins are not printed. For example, if left and right
margins are set to 15 mm in the Menu and an
application attempts to print data to the full width, 15
mm strips on both sides are not printed.

Roll Paper Printable Area

The gray area in the illustration below shows the
printable area.
When printing borderless on the left and right, the left
and right margins are 0 mm. When printing borderless
on all edges, all margins are 0 mm.
The arrow in the illustration indicates the direction of
the ejected paper.
The margins for roll paper differ as shown below,
depending on the Roll Paper Margin setting in the
Menu.
Roll Paper Margin Settings U
on page 103
The factory setting is
Roll Paper Margin
Parameter
Default
Top/Bottom 15mm
User's Guide
Basic Operations
"Printer Setup menu"
.
Margin Values
A, C
*2
= 15 mm
B, D
= 3 mm
A, C
= 15 mm
B, D
= 3 mm
Roll Paper Margin
Parameter
Top 35/Bottom 15mm
3mm
15mm
*1 Selecting Roll Paper (Banner) in the printer
driver sets the top and bottom margins of the
paper to 0 mm.
*2 When Default is selected, the value for
mm for the following paper.
Premium Glossy Photo Paper (250)/Premium
Semigloss Photo Paper (250)/Premium Luster
Photo Paper (260)/Premium Semimatte Photo
Paper (260)
Note:
❏ Printing is distorted when the trailing edge of the roll
paper comes off the core. Make sure the trailing edge
does not come inside the printing area.
❏ The print size does not change even when the
margins are changed.

Cut Sheets Printable Area

When printing borderless on the left and right, the left
and right margins are 0 mm.
The arrow in the illustration indicates the direction of
the ejected paper.
46
Margin Values
A
= 35 mm
C
= 15 mm
B, D
= 3 mm
A, B, C, D
= 3 mm
A, B, C, D
= 15 mm
A
is 20