Epson Stylus Pro 4900/4910
When a Maintenance Call/Service Call Occurs
Error messages
Call For Service
Code XXXX
Power off and then on.
If this doesn't work, note the code
and call for service.
Maintenance Request
Code XXXX
Refer to the manual.
User's Guide
Problem Solver
What to do
A call for service occurs when:
❏
The power cable is not connected securely
❏
An error that cannot be cleared occurs
When a call for service has occurred, the printer automatically stops printing. Turn off the
printer, disconnect the power cable from the outlet and from the AC inlet on the printer,
and then reconnect. Turn on the printer again multiple times.
If the same call for service is displayed on the screen, contact your dealer or Epson Support
for assistance. Tell them the call for service code is "XXXX".
A part used in the printer is nearing the end of its service life.
Contact your dealer or Epson Support and tell them the maintenance request code.
You cannot clear the maintenance request until the part is replaced. A service call occurs if
you continue to use the printer.
137