Banner Printing (On Roll Paper) - Epson Stylus Pro 4900 User Manual

Epson Stylus Pro 4900/4910
Banner printing (on roll
paper)
You can print banners and panoramic pictures if you
create and set print data for banner printing in your
application.
There are two ways to print a banner.
Printer Driver Source
Roll paper
Roll paper (Banner)
* Create print data at a size supported by the given application
while maintaining the printing length and width ratio.
The following printing sizes are available.
The minimum paper size supported by this printer is
203 (width) x 254 (length) mm. If you create a
user-defined paper size smaller than this minimum size,
you can print on paper that is larger than 203 (width) x
254 (length) mm, and then trim the margins to the size
you require.
Available Media Sizes
Width 89 to 432 mm
* Windows: Max. 15000 mm
Length
Mac OS X: Max. 15240 mm
* The paper length can be longer if using applications that
support banner printing. However, the actual print size
depends on the application, the paper size loaded in the
printer, and the computer environment.
User's Guide
Printing Varieties
Supported Applications
Document preparation
software, image editing
*
software, and so on
Applications that support
banner printing
Making Settings in Windows
A
In the printer driver's Main screen, select Media
Type.
"Basic Printing Methods(Windows)" on
U
page 43
B
Select Roll Paper or Roll Paper (Banner) from
the Source list.
Tip:
❏ You can only use Roll Paper (Banner) for
applications that support banner printing.
❏ Selecting Roll Paper (Banner) sets the top and
bottom margins of the paper to 0 mm.
86