Screen View - Epson Stylus Pro 4900 User Manual

Epson Stylus Pro 4900/4910
G
r button (Menu button)
❏
If pressed in the ready status or when no paper is
loaded, the Menu is displayed. U
on page 99
❏
If pressed while printing, the Printer Status menu
from the Menu is displayed directly. U
menu" on page 106
❏
Goes to the next screen (Menu > Item > Parameter) if
pressed while the Menu is displayed.
H
X button (Paper Cut button)
Press to cut roll paper with the built-in cutter. U
"Manual cut method" on page 32
I
Y button (Paper Set button)
❏
This button locks or unlocks the paper presser.
"Loading and Ejecting Thick Paper" on page 40
U
"Loading roll paper" on page 29
U
❏
When pressed after roll paper printing is complete, the
paper presser is unlocked, roll paper is automatically
wound up and can be removed. When Remaining
Paper Setup is set to On from the Menu, the roll paper
is wound up after printing a barcode on the edge of
the paper indicating paper information such as the
amount of remaining roll paper. U
Reading Roll Paper Information" on page 26
J
Z button
❏
If pressed while a parameter is selected from the
Menu, the parameter is set or executed.
❏
If pressed while the ink is drying, the drying process is
canceled.
K
W button (Pause/Cancel button)
❏
The printer enters pause status if this is pressed while
printing. To release the pause status, press the W
button again, or select Pause Cancel on the screen
and then press the Z button.
To cancel print jobs being processed, select Job
Cancel on the screen and then press the Z button.
"Canceling Printing" on page 50
U
❏
If pressed while the Menu is displayed, the Menu is
closed and it returns to ready status.
L
W light (Pause light)
Indicates whether or not the printer is ready to print.
On : Not ready to print. Pausing or
canceling job.
User's Guide
Introduction
"Menu Operations"
"Printer Status
"Printing and
14
Off : Ready to print.
M
H light (Ink Check light)
The ink status is indicated by a lit or flashing light.
On : Indicates errors such as an
installed ink cartridge is
expended, an ink cartridge is not
installed, or a wrong ink cartridge
is installed. Check the contents of
the error on the control panel's
screen.
Flashing : The ink is low. We recommend
replacing the ink cartridge as soon
as possible because the ink may be
expended while printing.
Off : No error.
N
b light (Paper Check light)
The paper status is indicated by a lit or flashing light.
On : No paper loaded or the paper
setting is not correct. Check the
contents of the error on the
control panel's screen.
Flashing : Indicates errors such as paper jam,
or paper skew. Check the contents
of the error on the control panel's
screen.
Off : No error.

Screen View

A
Message