Deactivate Software Licenses; Robot Cyber Security; Cyber Security Pre-Requisites - Universal Robots e-Series Original Instructions Manual

1.7.3. Deactivate Software Licenses

• A new license file is required if the robot changes owners. In this case, the license file must
be deactivated.
• If you purchase a new software license for your robot, it is necessary to deactivate and
reactivate the license file in order to add the new software license.
1. In the Header, tap the Hamburger Menu and select Settings.
2. In the menu on the left, tap System and select Licenses.
3. On the bottom right of the Settings screen, tap Deactivate.
4. Please see 1.7.2. Activate the Software Licenses via myUR on the previous page

1.8. Robot Cyber Security

Before implementing cyber security, you must conduct a risk assessment to:
• Identify threats
• Define trust zones and conduits
• Specify the requirements of each component in the application.

1.8.1. Cyber Security Pre-requisites

Before your system can reach a secure state of operation, ensure the following:
e-Series 20
1. Introduction
Software Manual