Table of Contents
Advertisement
3 Components and Power Supply
3.4 RESET Button
The different features of the RESET button are described below.
Reset button
Fig. 8:
3.4.1 Rebooting the device
Once the device is operating normally, pressing the RESET button will restart the device.
3.4.2 Default configuration
The RESET button allows you to boot the device with its default configuration through the following steps:
• With the device switched off, keep the RESET button pressed until the device switches on.
• The POWER LED (green) will light up and the W LED will begin to blink. This blinking will continue for 10 seconds.
• For the device to boot with the default configuration, release the Reset button while the W LED is blinking (i.e., be-
fore the 10-second period expires).
Once the default configuration is running, you need to know what type of license the device has. Depending on the li-
cense, the device will operate as:
• Router: If you have a router license, the device will behave as a router. In this case, the default configuration estab-
lishes the following access IP address and mask:
• 5G enabler: If you have a 5G enabler license (5Ge), the device will have a special configuration. Please see Teldat
Dm1030-I - Teldat 5Ge-Rail User Manual for further information on how to access the device and its configuration.
To find out what type of license you have, execute a ping to IP address 192.168.1.1. The device, previously con-
figured with the default configuration and duly connected by means of an Ethernet cable, will respond to the ping in-
dicating whether you are dealing with a router or a 5Ge-R.
Note
Some devices come with customized settings. As a result, the default configuration may be different to
the one shown above.
3.5 Connecting Data
The Teldat 5Ge-Rail has the following data connections.
3.5.1 LAN connection
The Teldat 5Ge-Rail incorporates two Gigabit Ethernet 10/100/1000/2500 BaseT ports with automatic MDI/MDIX.
12
IP address: 192.168.1.1
IP mask: 255.255.255.0
Teldat S.A.
Teldat 5Ge-Rail Router
Advertisement
Table of Contents
Need help?
Do you have a question about the 5Ge-Rail and is the answer not in the manual?
Questions and answers