Related Manuals for Teldat 5Ge-Rail
Summary of Contents for Teldat 5Ge-Rail
- Page 1 Manual Teldat S.A. Teldat 5Ge-Rail Router Installation Manual Copyright© Teldat Dm1031-I Version 1.0 09/2022 Teldat S.A. Teldat 5Ge-Rail Router...
- Page 2 This publication is subject to change. Teldat S.A. offers no warranty whatsoever for information contained in this manual. Teldat S.A. is not liable for any direct, indirect, collateral, consequential or any other damage connected to the deliv- ery, supply or use of this manual.
-
Page 3: Table Of Contents
Chapter 2 Teldat 5Ge-Rail Router ......4 Power Supply ........ - Page 4 RF WAN Specifications ....... . B.1.1 Regulatory model “TLDPH00M1” compliance ..... . . Teldat 5Ge-Rail Router...
-
Page 5: I Related Documents
Related Documents Teldat S.A. I Related Documents Teldat Dm704-I Configuration and Monitoring Teldat Dm709-I LAN Interfaces Teldat Dm748-I Software Updating Teldat Dm772-I Configuration Interfaces Teldat Dm781-I Cellular Interface Teldat Dm812-I GPS Interface Teldat Dm1030-I Teldat 5Ge User Manual Teldat 5Ge-Rail Router... -
Page 6: About This Guide
1 About This Guide Teldat S.A. Chapter 1 About This Guide This is the installation guide for the Teldat 5Ge-Rail router. It contains information on how to correctly install the device in a working environment. 1.1 Supported Devices The information included in this installation guide only applies to the Teldat 5Ge-Rail router. -
Page 7: Technical Support
1 About This Guide Teldat S.A. 1.7 Technical Support Teldat S.A. offers a technical support service. Device software can be upgraded on a regular basis for maintenance purposes and for new features. Contact information: Web: http://www.teldat.com Tel.: +34 918 076 565 Fax: +34 918 076 566 Email: support@teldat.com... -
Page 8: Teldat 5Ge-Rail Router
2.2 Hardware Monitoring The Teldat 5Ge-Rail router's hardware is monitored via the LED panel, which provides visual information on what is happening in the device. The LEDs indicate the state of the hardware components, whether or not there is connectiv- ity, data flows, etc. -
Page 9: Components And Power Supply
3 Components and Power Supply Teldat S.A. Chapter 3 Components and Power Supply The following chapter provides detailed information on the Teldat 5Ge-Rail router chassis and its components. This information includes: • Components. • Information on assembly. • Power supply. - Page 10 In addition to the connectors, the front panel also contains a set of LEDs that indicate router status. LEDs Panel Fig. 2: The LED panel provides information on the status of the components (indicating whether they are active or not) and on network activity. Teldat 5Ge-Rail Router...
-
Page 11: Rear Panel
Amber -> SIM2 Selected. Green -> SIM1 Selected. 3.1.2 Rear panel The following figure shows the front panel. Here you will find the Teldat 5Ge-Rail SIM card slots. Rear Panel Fig. 3: The following table provides information on each connector, as well as a description:... -
Page 12: Mounting Options
3.2.1 Assembly: Recommendations Thanks to brackets in the housing, the Teldat 5Ge-Rail can be mounted on the wall or ceiling. Wall-/Ceiling mounting To install the device on the wall/ceiling, the mounting brackets may be readily attached to the housing. They are screwed to the wall/ceiling using six screws. -
Page 13: Power Source
Please read the following instructions carefully before connecting the router! 3.3.1 Connecting the power supply The Teldat 5Ge-Rail supports a 24 V to 110 V nominal DC power source. Note Please check that the device's power input is valid for your power feeding. - Page 14 Be sure to observe the correct polarity of the DC connection as the wrong polarity may destroy the external line fuse The Teldat 5Ge-Rail has one earth terminal (on the rear panel). It must be groun- ded through a cable with a section measuring, at least, 2 mm (AWG14).
-
Page 15: Poe
Connect the power supply cable to the power supply. 3.3.2 PoE The Teldat 5Ge-Rail device can be powered through an Ethernet cable, provided the latter complies with the POE 802.3at standard (PoE+). The LAN1 port is enabled for this. The image below shows how to connect the PoE injector to the device. -
Page 16: Reset Button
IP mask: 255.255.255.0 • 5G enabler: If you have a 5G enabler license (5Ge), the device will have a special configuration. Please see Teldat Dm1030-I - Teldat 5Ge-Rail User Manual for further information on how to access the device and its configuration. -
Page 17: Connecting The Wwan Antennas
Antenna connectors and bands on page 29 Installing these antennas in the Teldat 5Ge-Rail is essential to improve the quality of the signal received and trans- mitted by the cellular model. Note To achieve good quality performance, the Teldat 5Ge-Rail device should always have the WWAN an- tennas installed. -
Page 18: Connecting The Gps Antenna
3.5.4.1 Configuration using the local console (CONF connector) The Teldat 5Ge-Rail has an M12 8P A-Code female connector on the front panel that provides access to the router's local console and can operate as an asynchronous serial port. The following image shows the CONF connector loca- tion. - Page 19 • Configure the Ethernet interface on the IP terminal (usually a PC) using an IP address within the following range [192.168.1.2, 192.168.1.254] and mask 255.255.255.0. For example, 192.168.1.2, 255.255.255.0. • Connect the IP terminal Ethernet interface to any of the Ethernet switch ports on the Teldat 5Ge-Rail (LAN1 con- Teldat 5Ge-Rail Router...
-
Page 20: Connecting The I/O Signals
CD or on the web. 3.5.5 Connecting the I/O signals The Teldat 5Ge-Rail has an M12 8P A-Code female connector on the front panel that provides one Digital Input and one Digital Output. The following image shows the I/O connector location. - Page 21 Always disconnect the device form the main power supply before installing the SIM cards. Always disconnect the device before removing the casing to access the trays. When inserting the SIM cards, please protect yourself against electrostatic discharge (ESD). Do not touch the SIM card connectors. Teldat 5Ge-Rail Router...
-
Page 22: Compliance
Parque Tecnológico de Madrid, 28760 Tres Cantos, Madrid, Spain International Phone +34 91 807 65 65 4.2 Risk Identification WARNING: Signal word used to designate a potentially dangerous situation that may cause severe injuries or death if not avoided. Teldat 5Ge-Rail Router... -
Page 23: Safety Warnings
4 Compliance Teldat S.A. 4.3 Safety Warnings Teldat 5Ge-Rail Router... - Page 24 4 Compliance Teldat S.A. Teldat 5Ge-Rail Router...
-
Page 25: Weee Information
Richtlinie 2014/53/EU (RED) Richtlinien 2011/65/EU und 2015/863/EU (RoHS) des Europäischen Parlaments. Spanish (ES) Español Por la presente, Teldat S.A. declara que el tipo de equipo radioeléctrico Teldat 5Ge-Rail es conforme con: Directiva 2014/53/UE (RED) Directivas 2011/65/UE y 2015/863/UE (RoHS) del Parlamento Europeo y del Consejo. -
Page 26: Ce Marking
In accordance with Article 10 of 2014/53/EU, we inform you that national restrictions and requirements may apply for authorization purposes. These can change over time. Teldat S.A. recommends that you check with local authorities for the latest status of their national regulations. -
Page 27: Appendix A Technical Information
As far as the metal housing is concerned, the Teldat 5Ge-Rail router was designed to be placed in an enclosed space, protected from bad weather and never to be exposed to extreme environmental conditions. -
Page 28: Cleaning
Teldat 5Ge-Rail router software can be updated to newer versions. Please contact your dealer for information about new versions. There are several ways to update one of our routers. Please see the “Teldat Dm748-I Software Updating” manual for further information. -
Page 29: Connectors
+ V DC A.3.2 LAN connector The Teldat 5Ge-Rail has two Ethernet interfaces. These are used to connect individual PCs or other switches. The connection is made via an M12 8P X-Code female socket. The pin assignment is as follows: M12 8P X-Code female connector GE Signal ->... -
Page 30: Gps Connector
RS232-TxD (Output) RS232-RxD (Input) 4, 6 RS232-GND 3, 7 Digital Input 1, 2 Digital Output (Relay) A.4 Technical Specifications A.4.1 Hardware architecture Processor NXP LayerScape multicore processor. Memory DDR4 1 GByte. Storage unit FLASH Memory 32 MBytes. Teldat 5Ge-Rail Router... -
Page 31: Lan Interface
Technical Information Teldat S.A. A.4.2 LAN interface Protocols Ethernet (802.3). Ports Port managed with MDI/MDX autodetection. Speed 10/100/1000/2500 Mbps (BaseT). Connector M12, 8 pins, X-coded. Teldat 5Ge-Rail Router... -
Page 32: Wireless Wan Interface
• 12 layers LTE + TDD (100MHz BW,256QAM, 4x4): ~3.33Gbps @ 95% duty cycle • 16 layers LTE + FDD (20MHz BW,256QAM, 4x4): ~2.03Gbps • Uplink: • 2 layers LTE + TDD (100MHz BW,256QAM, SISO): ~660Mbps @ 92.5% duty cycle Teldat 5Ge-Rail Router... - Page 33 Teldat 5Ge-Rail Router...
-
Page 34: Gps Interface
• Acquisition: -145 dBm Sensitivity • Tracking: -162 dBm • Reacquisition: -152 dBm Dynamic Performance • Maximum Altitude: 18000 m • Maximum Velocity: 515 m/s • Maximum Acceleration: 4g Connector QMA female. Antenna 3.3 V active or passive. Teldat 5Ge-Rail Router... -
Page 35: Configuration Interface
Maximum leakage current 1 mA. To limit power consumption at high input voltages Insulation voltage 1500 V d.c. Input to output. Connector M12. Comments Polarity Independent. Surge protection is recommended due to possible connection to power sources. Teldat 5Ge-Rail Router... -
Page 36: Electrical Specifications
Power over Ethernet According to 802.3at (PoE+) on LAN-1 (> 5 °C only) To ensure safe operation, Teldat 5Ge-Rail devices have a protective earth connection. The minimum cross-section of the earth lead should be 2.5 mm . The distance between the device and the earth connection should be as short as possible. -
Page 37: Environmental Specifications
EN 50155: 95 %. max. Altitude class 1400 meters max. Pollution degree conformance Shock and Vibration Category 1 Class B of EN 61373 “Categories & Classes”: Rapid temperature variation class Conformal coating type Fire behavior compliance According to EN 45545-2 Teldat 5Ge-Rail Router... -
Page 38: Appendix B Radio Information
Rx: 2620–2690 MHz Band 20 Tx: 832–862 MHz +23 dBm ± 2 dB Rx: 791–821 MHz Band 28 Tx: 703–748 MHz +23 dBm ± 2 dB Rx: 758–803 MHz Technology: UMTS(WCDMA)/ HSDPA/ HSUPA/ HSPA+/ DC-HSPA+. FN980 specifications. Teldat 5Ge-Rail Router... -
Page 39: Regulatory Model "Tldph00M1" Compliance
B.1.1 Regulatory model “TLDPH00M1” compliance The conformity assessment procedure mentioned in Article 17 and detailed in Annex III of Directive 2014/53/EU has been verified when it comes to the Teldat 5Ge-Rail with Regulatory Model "TLDPH00M1" using the following tech- nologies and bands: •...
Need help?
Do you have a question about the 5Ge-Rail and is the answer not in the manual?
Questions and answers