Table of Contents
Advertisement
3 Components and Power Supply
LAN1
LAN2
RST
GPS
A, B, C and D
In addition to the connectors, the front panel also contains a set of LEDs that indicate router status.
LEDs Panel
Fig. 2:
The LED panel provides information on the status of the components (indicating whether they are active or not) and
on network activity.
6
-
Digital input specification
on page 31
-
Digital output specification
LAN1/POE 2.5 Gigabit Ethernet.
Refer to
PoE
on page 11 for more information on PoE connection
For more information on the LAN interface, refer to:
-
LAN connection
on page 12
-
LAN connector
on page 25
-
LAN interface
on page 27
LAN2. 2.5 Gigabit Ethernet.
For more information on the LAN interface, refer to:
-
LAN connection
on page 12
-
LAN connector
on page 25
-
LAN interface
on page 27
Reset button.
For further information on how the reset button works, please see
on page 12.
GPS Antenna connector.
For more information on the GPS interface, refer to:
-
Connecting the GPS antenna
-
GPS connector
on page 26
-
GPS interface
on page 30
WWAN Antenna connectors
The number of connectors depends on the device model (2 connectors for LTE-A
and LTE-A+ models, 4 connectors for 5G-capable models).
For more information on the antenna connections, refer to:
-
Connecting the WWAN antennas
-
WWAN antenna connector
-
Wireless WAN interface
on page 29
on page 31
on page 14
on page 13
on page 25
Teldat S.A.
RESET Button
Teldat 5Ge-Rail Router
Advertisement
Table of Contents
Need help?
Do you have a question about the 5Ge-Rail and is the answer not in the manual?
Questions and answers