3-4.2 To Verify 6-Channel Audio - SOLTEK 85DR2-DC Manual

85DR2-DC / 85DR2-DCL

3-4.2 To verify 6-channel Audio

After installation of AC'97 6-channel Codec, you must configure the
5.1 Speaker connection to enable the 6-channel audio.
1. Connect your on-board Audio Connector to your 6-channel
speakers as depicted in the figure below:
Pale Green Connector
to Front Speaker
2. After Connection is done, start your Windows system and double
click the Avance Sound Effect manager icon to enter 6-channel
configuration:
Pale Pink Connector to
Center/Subwoofer Speaker
Pale Blue Connector
to Rear Speaker
46
Sound Effect
Manager icon on
Windows XP