Table of Contents
Advertisement
4. Using the Spacebar, choose "Security" under the "Optimize Array
for " section.
5. Press <Ctrl-Y> keys to save and create the array.
6. The window below will appear:
Do you want the disk image to be duplicated to anther? (Yes/No)
Y - Create and Duplicate
N - Create Only
7. Press "N" for the Create Only option.
8. A window will appear almost immediately confirming that your Secu-
rity array has been created. Press any key to reboot the system.
9. Proceed with normal FDISK and format procedures as if you hajust
installed a new hard drive.
10. Once the arrayed drives have been formatted, proceed to Section
5-2 "Installing Driver" to install your operating system and Fast
Trak133-Lite driver.
Array has been created.
<Press Any key to Reboot>
93
Chapter 5 RAID Controller
Advertisement
Table of Contents
