SOLTEK 85DR2-DC Manual page 49

85DR2-DC / 85DR2-DCL
5. In the "Update device Driver Wizard" screen, click "Next" to
continue until you see a dialog box asking you to "Specify a
location" for the driver. You should now insert the Support CD
into your CD-ROM.
6. As illustrated in the picture below, check the item "Specify a
location" and click the "Browse" button to find out the correct path
for the driver. Supposing your CD-ROM drive is Drive E, please
type:
E:\Driver\Network\RTL8139\Win98 into the blank bar. (Please
note that both RTL8100B and RTL8139C controllers are
supported by Driver RTL8139. ) Then click the "Next" button to
continue.
7. The Update Device Driver Wizard will then go on installing the
driver until the "Insert Disk" dialog box shows up. Please with-
draw your Support CD and insert the Windows 98 CD-ROM into
the CD-ROM drive for updating system and click "OK" to continue.
8. The Update Device Driver Wizard will then proceed to update the
system with the LAN driver. When the "Finish" screen shows up,
click "Finish" to continue.
9. Final Dialog box will appear to remind you that you must restart
your computer to finish updating the new hardware. Please click
"Yes" to restart system and finish the LAN driver installation.
Enter the correct path for
the location of LAN driver
52