SOLTEK 85DR2-DC Manual page 85

Series 85DR2: 85DR2, 85DR2-L, 85DR2
5-1.2 Creating A Security (Mirror) Array With New Drives
FastTrak133-Lite on board permits only two drives to be used for a
single Mirroring array with FastBuild Utility.
1. Boot your system with FastTrak133-Lite Controller enabled by JP17
and your hard drive(s) connected to IDE3/IDE4. Suppose this is the
first time to create a Disk Array. The Promise BIOS on board with
FastBuild Utility built in will scan the IDE devices and display the
result as below:
FastTrak133-Lite (tm) BIOS Version 1.xx (Build xxxx)
(c) 1995-2000 Promise Technology, Inc. All Rights Reserved.
No array is defined...
Press <Ctrl-F> to enter FastBuild (tm) Utility
Or press <ESC> key to continue booting the system.
2. Press <Ctrl-F> keys to display the FastBuild (tm) Utility Main Menu.
3. Press "1" to display the Auto Setup Menu below. This is the fastest
and easiest method to create your first array.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Optimize Array for:
Typical Application usage:
Mode ............................................... Stripe
Spare Drive .............................................0
Drives used in Array ................................1
Array Disk Capacity .........................38166
[ ] Up [ ] Down [ , , Space] Change Option
+ , 85DR2
[Auto Setup Options Menu]
[Array Setup Configuration]
[Keys Available]
[ESC] Exit [Ctrl-Y] Save
92
+ -L
Performance
Desktop