3. Press "1" to display the Auto Setup Menu below. This is the fastest
and easiest method to create your first array.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Optimize Array for:
Typical Application usage:
Mode ............................................... Stripe
Spare Drive .............................................0
Drives used in Array ................................1
Array Disk Capacity .........................38166
[ ] Up [ ] Down [ , , Space] Change Option
4. Using Spacebar, choose "Performance" under "Optimize Array for "
section.
5. Select how you will use your PC under the Typical Application us-
age section The choices are A/V Editing, Server, and Desktop (the
default).
6. Press <Ctrl-Y> keys to save and create the array.
7. Reboot your system.
8. Once the array has been created on new drive(s), you would need to
FDisk and format the array as if it were a new single hard drive.
9. Also proceed to "Installing Drivers" section of this Chapter (see Sec-
tion 5-2) for system and FastTrak133 Driver setup.
[Auto Setup Options Menu]
[Array Setup Configuration]
[Keys Available]
[ESC] Exit [Ctrl-Y] Save
91
Chapter 5 RAID Controller
Performance
Desktop