Table of Contents
Advertisement
Series 85DR2: 85DR2, 85DR2-L, 85DR2
5-2.2-2 Installing Drivers During Windows 95 Installation
1. Connect your hard drive(s) for RAID Array to IDE3/IDE4, and enable
FastTrak133-Lite Controller with JP17. Configure the hard drive(s) for
RAID Array, partition and format your hard driver(s).
2. Install Windows 95 normally.
3. After installation, go to "Start" menu and choose "Settings."
4. Form the "Settings" menu, choose "Control Panel."
5. In the "Controller Panel" window, double-click on the "System" icon,
6. In the "System" window, choose the "Device Manager" tab.
7. In the hierarchical display under "Other Devices" is a listing for "PCI
RAID Controller." Choose it and then press the "Properties" button.
8. Choose the "Driver" tab in the "Properties" window, and then press the
"Update Driver" button.
9. When asked if you want Windows to research for the driver, choose
"Yes (recommended)."
10. Insert the "FastTrak133-Lite Driver" diskette into the A: drive, then
press "Next."
11. When Windows informs you that it was unable to find the drivers, press
"Other Locations..."
12. In the "Select Other Location" dialog box, type "A:\WIN9x-ME".
13. Press "Next" button. A message informing you that Windows 95 has found "
Win95-98 Promise FastTrak133-Lite (tm) Controller" should appear.
14. Press "Finish." (If Windows can't find the "FastTrak133-Lite.MPD" file,
type "A:\WIN9x-ME" in the copy files from:" text box).
15. Choose "Yes" when asked if you wish to restart the system, and remove
the diskette from Drive A.
+
, 85DR2
+
-L
100
Advertisement
Table of Contents
