SOLTEK 85DR2-DC Manual page 61

85DR2-DC / 85DR2-DCL
S.M.A.R.T. for Hard Allows you to enable / disable the Self Monitoring
Disks Analysis and Reporting Technology for the hard disk.
Choices: Enabled; Disabled (default)
Bootup Num-lock Allows you to toggle between On (default) or Off to
control the state of the NumLock keys when the
system boots. If On, the numeric keypad is in nu-
meric mode. If off, the numeric keypad is in cursor
control mode.
Floppy Drive Swap Disabled (default), Floopy Drive A will not be chnged to
B, nor B to A. Enabled, Floppy Drive a and B will change
position.
Floppy Drive Seek Disabled (default), Floppy Drives will not be checked and
diagnosed at system bootup; Enabled, Floppy Drives
will be checked and diagnosed at system bootup.
PS/2 Mouse Support Enabled (default), PS/2 mouse is supported. Disabled,
PS/2 Mouse is not supported
Primary Display Allows you to choose the primary display for the system.
Choices: VGA/EGA (default); CGA40x25; CGA80x25;
Mono; Absent
Password Check Allows you to set BIOS to check up password with a
password prompt at BIOS Setup or whenever re-
starting system.
Choices: Setup (default); Always
Boot to OS/2 Allows you to set your system to OS/2 operating
system.
Choices: Yes; No (default)
CPU Microcode Allows you to enable/disable the CPU Microcode
Updation Update function.
Choices: Disabled; Enabled (default)
L1 /L2 Cache Use this item to enable/disable the L1/L2 cache.
Choices: Enabled (default); Disabled
64