Table of Contents
Advertisement
Quick Links
Contents
Item Checkup ........................................................ 7
Chapter 1 Specification ............................................. 8
1-1 Mainboard Layout ................................................................... 9
1-2 Mainboard Specifications .................................................... 10
1-2.1 CPU Socket ................................................................................... 10
1-2.2 System Chipsets ........................................................................... 10
1-2.3 Memory ......................................................................................... 10
1-2.4 Advanced System Power Management .................................... 10
1-2.5 Accelerated Graphics Port (AGP) Interface ........................... 11
1-2.6 AMI BIOS ..................................................................................... 11
1-2.7 Multi-I/O Functions : .................................................................. 11
1-2.8 Expansion Slots ............................................................................ 12
1-2.9 LAN on board (for 86SP2-L only) ............................................ 12
1-2.10 Hardware Monitor on board ................................................... 12
1-2.11 AC'97 Audio Codec on board ................................................. 12
1-2.12 Form Factor ................................................................................ 12
1-3 Mainboard Specification Table ........................................... 13
1-4 Chipset System Block Diagram ........................................... 14
Chapter 2 Hardware Setup ..................................... 16
2-1 CPU Installation with Socket 478B .................................... 17
2-1.1 To Identify a Pentium 4 CPU ..................................................... 17
2-1.2 CPU Installation with Socket 478B .......................................... 18
2-2 Pentium 4 CPU Fan Installation: ....................................... 19
2-3 Memory Installation ............................................................. 20
2-3.1 To Install DDR SDRAM Module .............................................. 21
Contents
4
Advertisement
Table of Contents
Related Manuals for SOLTEK 86SP2
Summary of Contents for SOLTEK 86SP2
-
Page 1: Table Of Contents
1-2.6 AMI BIOS ..................11 1-2.7 Multi-I/O Functions : ..............11 1-2.8 Expansion Slots ................12 1-2.9 LAN on board (for 86SP2-L only) ..........12 1-2.10 Hardware Monitor on board ........... 12 1-2.11 AC’97 Audio Codec on board ..........12 1-2.12 Form Factor ................ - Page 2 3-3.1 Install AC’97 6-channel Audio Driver ........41 3-3.2 Verify 6-channel Audio ............... 42 3-4 To Install Hardware Monitor Utility ........45 3-4.1 Installation ................... 45 3-4.2 Verification .................. 46 3-5 To Install LAN Drivers (for 86SP2-L only) ....... 47...
- Page 3 Contents 3-5.1 RTL8101L LAN driver on Windows ME / 2000 / XP .... 47 3-5.2 RTL8101L LAN driver on Windows 9X ........47 3-6 To Install USB 2.0 Driver for Windows 2000/XP ..... 49 Chapter 4 AMI BIOS Setup ........50 4-1 About BIOS Setup ..............
- Page 4 Contents 4-6.7.2 User Password ................83 4-6.7.3 Change Supervisor Password ..........84 4-6.7.4 Change User Password ............85 4-6.7.5 Clear User Password ..............85 4-6.7.6 Boot Sector Virus Protection ........... 86 4-6.8 Save Changes and Exit ............... 86 4-6.9 Discard Changes ( and Exit ) ............. 87 4-6.10 Load Optimal Defaults .............
-
Page 5: Chapter 1 Specification
86SP2 / 86SP2-L Chapter 1 Specification Introduction This series of mainboards features an integration of the powerful pro- cessor Intel Pentium 4 and the single-chip North Bridge Intel SPRINGDALE-P. The Intel P4 processor is a rapid execution engine providing 800/533/400MHz system bus, while North Bridge Intel... -
Page 6: Mainboard Layout
Chapter 1 Specification 1-1 Mainboard Layout LAN Controller for 86SP2-L only LJP1 RJ45 PS/2 Mouse JKB1 Fan2 (on top) Fan1 PS/2 K/B (underside) USB0 (middle) USB1 (underside) JFSB1 JFSB2 Main +12V Power Power RJ45 (on top) USB2 (middle) USB3 (underside) -
Page 7: Mainboard Specifications
86SP2 / 86SP2-L 1-2 Mainboard Specifications 1-2.1 CPU Socket CPU Socket 478B on board, supporting Intel ® Pentium 4 processors (including Intel Hyper-Threading CPUs) in 478-pin package for : -- 800/533/400MHz System Bus; -- Hyper-pipelined technology; -- Advanced dynamic execution;... -
Page 8: 1-2.5 Accelerated Graphics Port (Agp) Interface
Chapter 1 Specification 1-2.5 Accelerated Graphics Port (AGP) Interface AGP Controller embedded on board, supporting: • 1.5V (4x/8x) power mode only • 8x 66MHz AD and SBA signalling, AGP pipelined split-transection longburst transfers up to 2GB/sec • AGP 8X/4X supported, AGP V3.0 compliant 1-2.6 AMI BIOS Flash Memory for easy upgrade, supporting BIOS Writing Protection, Year 2000 compliant, and supporting various hardware configuration... -
Page 9: 1-2.8 Expansion Slots
• Hardware Monitor supported by W83627HF, providing monitoring and alarm for flexible desktop management of hardware voltage, tempera- tures and fan speeds. • Utility Software Soltek Hardware Monitor for displaying system status is enclosed in Support CD for user’s installation. 1-2.11 AC’97 Audio Codec on board AC’97 Audio Codec 2.2 compliant on board... -
Page 10: Mainboard Specification Table
Chapter 1 Specification 1-3 Mainboard Specification Table 86SP2/86SP2-L Specifications and Features Socket 478B for P4 CPU( HT CPU included) Intel SPRINGDALE-P,supporting 533/400MHz North Bridge South Bridge Intel ICH5 BIOS AMI BIOS Memory Supporting Dual-channel DDR 333/266 SDRAM, up to 2GB in 2 DIMM slots... -
Page 11: Chipset System Block Diagram
86SP2 / 86SP2-L 1-4 Chipset System Block Diagram Intel Pentium 4 CPU (Hyper-Threading Included) System Bus 533/400MHz North Bridge DDR memory Interface System Intel Memory DDR 333/ AGP 8X/4X AGP Slot SPRINGDALE-P 266 SDRAM 266MB/s Hub Interface 5 PCI Slots... -
Page 12: Chapter 2 Hardware Setup
86SP2 / 86SP2-L Chapter 2 Hardware Setup To Get Things Ready for Hardware Setup ! 1. We recommend to install your CPU before any other components. For detailed installation instructions of processor, you can also refer to the pamphlet enclosed in your CPU package. -
Page 13: Cpu Installation With Socket 478B
Chapter 2 Hardware Setup 2-1 CPU Installation with Socket 478B 2-1.1 To Identify a Pentium 4 CPU Intel pentium 4 2.4 GHz / 512 / 533 / 1.5V (Hyper-Threading CPU included) 4) CPU Voltage Vcore 3) System Clock 2) CPU L2 Cache 1) CPU Working Frequency On the heatsink side of a Pentium 4 CPU, there printed a line of figures to identify its specifications. -
Page 14: 2-1.2 Cpu Installation With Socket 478B
86SP2 / 86SP2-L 2-1.2 CPU Installation with Socket 478B This mainboard is built with CPU Socket 478B ( 478-pin) supporting the Intel Pentium 4 CPU: • Follow the steps described in this section to install the 478-pin Pen- tium 4 CPU into the on board Socket 478. -
Page 15: Pentium 4 Cpu Fan Installation
Chapter 2 Hardware Setup 2-2 Pentium 4 CPU Fan Installation: CPU Fan Connector Pentium 4 Fanbase 1.Press down 4 latches. 2.Press down the 2 levers to lock fan to fanbase 3.Connect Fan Connector to CPU FAN connector The above pictures are taken from sample mainboards as installation illustr- ation. -
Page 16: Memory Installation
86SP2 / 86SP2-L 2-3 Memory Installation How to tackle the memory Modules: • Make sure to unplug your power supply before adding or removing memory module. • Pay attention to the orientation of the DIMM slots. Dual Channel Memory Features •... -
Page 17: 2-3.1 To Install Ddr Sdram Module
Chapter 2 Hardware Setup 2-3.1 To Install DDR SDRAM Module • To enable Dual-channel memory function, users should insert totally identical (size and frequency) DDR module pair into the bank-pair. • DDR DIMM slot has 184 pins and one notch. Insert a DDR SDRAM vertically into the 184-pin slot with the notch-to-rib matching. -
Page 18: Agp 8X/4X Slot Installation
86SP2 / 86SP2-L 2-4 AGP 8X/4X Slot Installation The AGP slot on board supports 1.5V AGP 8X/4X card only. A Rib is specifically added to the 8X/4X slot so as to match the AGP 8X/4X card. To insert a 3.3V AGP 2X card into the AGP 4X slot will damage the system chip and burn the 1.5V circuitry. -
Page 19: Ide Connectors Installation
Chapter 2 Hardware Setup 2-5 IDE Connectors Installation To install IDE Connector, you may connect the blue connector of IDE cable to the primary (IDE1) or secondary (IDE2) connector on board, and then connect the gray connector to your slave device and the black connector to your master device. -
Page 20: Serial Ata Connectors Installation
86SP2 / 86SP2-L 2-6 Serial ATA Connectors Installation The Serial ATA is designed to improve the Parallel ATA with the capabil- ity of Hot Plug and offer a data bandwidth of 150Mbytes/second. It also reduce voltage and pin count and can be implemented with thin cables which improve the inner ventilaton of PC cases. -
Page 21: Floppy Drive Connector Installation
Chapter 2 Hardware Setup 2-7 Floppy Drive Connector Installation To install FDC, you should connect the end of FDC cable with single connector to the board, and connect the other end with two connectors to the floppy drives. PS/2 Mouse JKB1 Fan2 (on top) -
Page 22: Atx V2.03 Power Supply Installation
86SP2 / 86SP2-L 2-8 ATX V2.03 Power Supply Installation +12V Power Connector +12V +12V PWR OK +12V PS ON# +3.3V -12V PS/2 Mouse JKB1 Fan2 (on top) +3.3V +3.3V Fan1 USB0 PS/2 K/B (underside) (middle) Pin1 Pin11 USB1 (underside) Main Power Connector... -
Page 23: Jumper Settings
W83627HF JBAT1 PCI 5 BIOS Battery Fan3 USB2 USB3 LJP1 JBAT1 LAN Controller Select Clear CMOS (86SP2-L only) 1-2 closed 1-2 closed (default) (default) To hold data LAN controller Enabled 2-3 closed 2-3 closed To clear CMOS LAN controller Disabled... -
Page 24: 2-9.1 Jfsb1 & Jfsb2: Cpu Frequency Select
86SP2 / 86SP2-L How to tackle the Jumpers: A 2-pin Jumper A 3-pin Jumper If a pin-header (of 2 or more pins) is designed in such a way that its pins can be closed or linked together to The conductor inside the cap set up a specific function, this header links two header-pins together. -
Page 25: 2-9.2 Jbat1: Clear Cmos
Chapter 2 Hardware Setup Further Notes on CPU Overclocking: 1. If you have successfully booted system, with or without CPU overclock, you still can try another CPU overclock in BIOS Setup. Please enter BIOS Setup, choose “Frequency/Voltage Control” of Advanced BIOS Features, and configure the “CPU Clock” item to raise your CPU clock. -
Page 26: 2-9.3 Ljp1: Lan Controller Select (86Sp2-L Only)
86SP2 / 86SP2-L 2-9.3 LJP1: LAN Controller Select (86SP2-L only) LJP1 is a 3-pin jumper for enabling or disabling the on-board LAN Controller. Users can set LJP1 1-2 closed to enable the on-board LAN Controller so as to set up the LAN driver, or to set LJP1 2-3 closed to disable the on-board LAN Controller. -
Page 27: Other Connectors Configuration
Chapter 2 Hardware Setup 2-10 Other Connectors Configuration This section lists out all connectors configurations for users’ reference. 2-10.1 On Board Fan Connectors Void Sensor +12V PS/2 Mouse JKB1 Fan2 (on top) +12V Fan1 USB0 PS/2 K/B (underside) (middle) USB1 (underside) Sensor Conn. -
Page 28: 2-10.2 Usb Ports And Usb Pin-Headers
86SP2 / 86SP2-L 2-10.2 USB Ports and USB Pin-headers This series provides four USB ports on board supporting various USB devices. In addition, two USB pin-headers are added on board to pro- vide expansion of four more optional USB ports by using two additional USB cables. -
Page 29: 2-10.3 Chassis Panel Connectors
G : USB 0 (middle) B : USB 1 (underside) H : COM1 Connector C : LPT1 Port : COM2 Connector D : RJ45 (86SP2-L only) J : USB 2 (middle) E : Line in/ USB 3 (underside) Rear Speaker Out... -
Page 30: 2-10.5 Ps/2 Mouse And Ps/2 Keyboard
86SP2 / 86SP2-L 2-10.5 PS/2 Mouse And PS/2 Keyboard (PS/2 Mouse: On top of keyboard connector, green) 6 Void 5 Mouse Clock 4 VCC 3 GND 1 Mouse Data 2 Void 6 Void 5 Keyboard Clock 3 GND 4 VCC... -
Page 31: 2-10.7 Lan Connector (86Sp2-L Only)
Chapter 2 Hardware Setup 2-10.7 LAN Connector (86SP2-L Only) One RJ45 connector is on board for network connection. Green LED blinks to indicate Yellow LED “On” to indicate that data transmission is Network hub is in connection undergoing in 10/100 Base T with the system. -
Page 32: 2-10.9 Complex Pin-Header
86SP2 / 86SP2-L 2-10.9 Complex Pin-header This complex Pin-header consists of the following connectors for vari- ous supports. When you have fixed the mainboard to the case, join the connectors of this Complex Pin-header to the case Front Panel. PS/2 Mouse... - Page 33 Chapter 2 Hardware Setup (1) Power Switch Connector: Connection: Connected to a momentary button or switch. Function: Manually switching the system between “On” and “Soft Off”. Pressing the momentary button for more than 4 seconds will also turn the system off. (2) IR Connector (Infrared Connector): Connection: Connected to Connector IR on board.
-
Page 34: Chapter 3 Software Setup
3-1 To Open up the Support CD 3-2 To Install Intel Chipset Software Installation Utility 3-3 To Install AC’97 Audio Drivers 3-4 To Install Hardware Monitor Utility 3-5 To Install LAN Drivers (for 86SP2-L only) 3-6 To Install Intel USB V2.0 Drivers... -
Page 35: To Open Up The Support Cd
Chapter 3 Software Setup 3-1 To Open up the Support CD 1. Please put the Support CD enclosed in your mainboard package into the CD-ROM drive. In a few seconds, the Main Menu will automatic- ally appear, displaying the contents to be installed for this series: 2. -
Page 36: Intel Chipset Software Installation Utility
86SP2 / 86SP2-L 3-2 Intel Chipset Software Installation Utility 1. Following the procedures of opening the Support CD, click to “ Install Intel Chipset software installation Utility” to proceed. 2. The Intel Service Pack InstallShield Wizard will pop up to guide you to the Intel Service pack installation. -
Page 37: Ac'97 Audio Driver Installation
Chapter 3 Software Setup 3-3 AC’97 Audio Driver Installation Avance AC97 Audio Codec on board, AC’97 2.2 compatible stereo audio code for PC multimedia systems. Avance AC’97 Audio Codec Driver is pro- vided in Support CD for user’s installation. 3-3.1 Install AC’97 6-channel Audio Driver 1. -
Page 38: 3-3.2 Verify 6-Channel Audio
86SP2 / 86SP2-L 3-3.2 Verify 6-channel Audio After installation of AC’97 6-channel Codec, you must configure the 5.1 Speaker connection to enable the 6-channel audio. 1. Connect your on-board Audio Connector to your 6-channel speakers as depicted in the figure below:... - Page 39 Chapter 3 Software Setup 3. The AC’97 Audio Configuration” screen will pop out. Clikc the “Speaker Configuration” bar with your mouse. 4. Instantly, the “Speaker Configuration” screen will pop out. Pick the items “6-channel mode for 5.1 speakers output” and “ Synchronize the phonejack switch with the speakers settings”...
- Page 40 86SP2 / 86SP2-L 5. At finishing the Speakers Configuration, you can also click the “Speaker Test” bar on the screen to test the 6-channel performance. The figure below is the “Speaker Test” screen with testing instructions enclosed on it. Follow the instructions to perform the Speakers Test.
-
Page 41: To Install Hardware Monitor Utility
Chapter 3 Software Setup 3-4 To Install Hardware Monitor Utility 3-4.1 Installation Hardware Monitor is built on this mainboard. Its installation is pro- grammed to a fully automated mode on Windows 9X/Me/NT4/2000/ XP. Users can follow the model installation below for its installation on various Windows System. -
Page 42: 3-4.2 Verification
86SP2 / 86SP2-L 3-4.2 Verification 1. After installing Soltek Hardware Monitor, double click “SoltekHM” icon on the desktop to open the main window of the Soltek Hardware Doctor. 2.Then the pop-up screen will show all information about CPU Temperature, Fan Speed and various Voltages. -
Page 43: To Install Lan Drivers (For 86Sp2-L Only)
Chapter 3 Software Setup 3-5 To Install LAN Drivers (for 86SP2-L only) 3-5.1 RTL8101L LAN driver on Windows ME / 2000 / XP 1. When you newly install Windows ME, Windows 2000 or Windows XP, the system will detect the LAN Controller on board and configure it automatically into system. - Page 44 86SP2 / 86SP2-L 5. In the “Update device Driver Wizard” screen, click “Next” to continue until you see a dialog box asking you to “Specify a location” for the driver. You should now insert the Support CD into your CD-ROM.
-
Page 45: To Install Usb 2.0 Driver For Windows 2000/Xp
Chapter 3 Software Setup 3-6 To Install USB 2.0 Driver for Windows 2000/XP USB V2.0 with its 480Mb/s transfer rate supports operating system Windows 2000 and Windows XP via the Windows 2000 and Windows XP Service Pack. For archieving Intel USB 2.0 support, users should install the latest Service Pack for Windows 2000 or Windows XP. -
Page 46: Chapter 4 Ami Bios Setup
86SP2/86SP2-L Chapter 4 AMI BIOS Setup THE BIOS BIOS stands for Basic Input and Output System. It was once called ROM BIOS when it was stored in a Read-Only Memory (ROM) chip Now manufacturers would like to store BIOS in EEPROM which means Electrically Erasable Programmable Memory. -
Page 47: About Bios Setup
Chapter 4 BIOS Setup 4-1 About BIOS Setup BIOS setup is an interactive BIOS program that you need to run when: 1. Changing the hardware of your system. (For example: installing a new Hard Disk etc.) 2. Modifying the behavior of your computer. (For example: changing the system time or date, or turning special features on or off etc.) 3. -
Page 48: To Update Bios
86SP2/86SP2-L 4-5 To Update BIOS • System BIOS is incorporated into a Flash memory component. Flash BIOS allows user to upgrade BIOS without the need to replace an EPROM component. • The Upgrade Utility can be loaded on a floppy diskette for upgrading saving, and verifying the system BIOS. - Page 49 Chapter 4 BIOS Setup Step 4. Under “ A “ prompt, type “ afudos /i*.ROM /pbnc “ and then press <Enter> to run BIOS update program. Please note that there should be no space between /i and *.ROM. (*.ROM depends on your mainboard model and version code.
-
Page 50: Bios Setup
86SP2/86SP2-L 4-6 BIOS SETUP --- CMOS Setup Utility 4-6.1 CMOS Setup Utility This mainboard comes with the AMI BIOS from American Megatrends Inc. Enter the CMOS Setup Utility Main Menu by: 1. Turn on or reboot your system. After a series of diagnostic checks, the following message will appear: PRESS <Del>... -
Page 51: 4-6.2 Standard Bios Features
Chapter 4 BIOS Setup 4-6.2 Standard BIOS Features “Standard BIOS Features” allows users to configure Time and Date. This menu also displays system information. Run the Standard BIOS Features as follows: 1. Choose “Standard BIOS Features” from the Main Menu and press <Enter>. - Page 52 86SP2/86SP2-L AMIBIOS/Processor/ These three items only show the respective current System memory statuses. They cannot be changed in the BIOS Setup. System Time The BIOS shows the time of the day in the format: hh:mm:ss. Choose the field with the Arrow keys and change the time with the Page Up/Page Down +/- keys.
-
Page 53: 4-6.3 Advanced Bios Features
Chapter 4 BIOS Setup 4-6.3 Advanced BIOS Features Advanced BIOS Features allows user to configure HDD, Floppy, Serial Port, Parallel Port etc..Run the Advanced BIOS Features as follows: 1. Choose “Advanced BIOS Features” from the Main Menu and a screen with a list of options will appear: CMOS Setup Utility - Copyright (C) 1985-2002, American Megatrends, Inc. -
Page 54: 4-6.3.1 Cpu Configuration
86SP2/86SP2-L 4-6.3.1 CPU Configuration Choose “CPU Configuration” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for configuration: CPU Configuration Help Item Configure advanced CPU settings Sets the ratio between CPU Manufacturer : Intel core clock and the FSB Brand String : Intel(R) Pentium (R) 4 CPU 1500MHz Frequency. -
Page 55: 4-6.3.2 Ide Configuration
Chapter 4 BIOS Setup 4-6.3.2 IDE Configuration Choose “IDE Configuration” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for IDE Devices configuration: IDE Configuration Help Item IDE Configuration IDE Configuration P/S-ATA (Auto) S-ATA Running Enhanced Mode P-ATA Channel Selection Both S-ATA Ports Definition... - Page 56 86SP2/86SP2-L 4-6.3.2-1 IDE Configuration IDE Configuration Allows you to configurare IDE device mode. Choices: P/S-ATA(Auto): Parallel/Serial ATA combined mode; S-ATA Only: For S-ATA running on board only; P/S-ATA(Win98/Me): P/S-ATA on Win98/Me only Disabled: IDE Configuration disabled IDE Configuration Choosing “P/S-ATA(Auto)” to configure the...
- Page 57 Chapter 4 BIOS Setup 4-6.3.2-2 Primary/Secondary IDE Master/Slave and Third/Fourth IDE Master Primary IDE Master Hard Disk Primary IDE Slave ATAPI CDROM Secondary IDE Master Not Detected Secondary IDE Slave Not Detected Third IDE Master Not Detected Fourth IDE Master Not Detected Press <Enter>...
- Page 58 86SP2/86SP2-L Type To select the types of the IDE devices: Not Installed; Auto: Setting type automatically CD-ROM: ATAPI (Packet Interface) CD-ROM drive ARMD: ATAPI Removable Media Device LBA/Large mode To auto-select (default) or disable LBA/Large mode. Block (Multi-Sector To auto-select (default) or disable Block Mode. If...
-
Page 59: 4-6.3.3 Floppy Configuration
Chapter 4 BIOS Setup 4-6.3.3 Floppy Configuration 1. Choose “Floppy Configuration” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for configuration: Floppy Configuration Help Item Floppy Configuration Floppy A 1.44 MB 3.5 in Select the type of floppy Floppy B Disabled drive connected to the... -
Page 60: 4-6.3.4 Super Io Configuration
86SP2/86SP2-L 4-6.3.4 Super IO Configuration Choose “SuperIO Configuration” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for configuration: SuperIO Configuration Help Item Configure Win627THF Super IO Chipset OnBoard Floppy Controller Enabled Allows BIOS to Enable or... - Page 61 Chapter 4 BIOS Setup OnBoard CIR Port Allows you to set the onboard CIR Port. Choices: Disabled; 2E0; 3E0 CIR Port IRQ Allows you to set the onboard CIR Port IRQ for 2E0 or 3E0. Choices: IRQ3; IRQ4; IRQ9; IRQ10; IRQ11 Parallel Port Address Allows you to configure Parallel Port Address.
-
Page 62: 4-6.3.5 Hardware Health Configuration
86SP2/86SP2-L 4-6.3.5 Hardware Health Configuration 1. Choose “Hardware Health Configuration” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for configuration: Hardware Health Configuration Hardware Health Configuration Help Item System Temperature : 34˚C/93˚F Enables Hardware Health Monitoring Device. -
Page 63: 4-6.3.6 Acpi Configuration
Chapter 4 BIOS Setup 4-6.3.6 ACPI Configuration Choose “ACPI Configuration” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for ACPI configuration: ACPI Configuration Help Item ACPI Settings Enables Hardware ACPI ACPI Aware O/S support for Operating System. - Page 64 86SP2/86SP2-L Advanced ACPI Configuration: To press< Enter > on Advanced ACPI Configuration will reveal the following item(s). ACPI 2.0 Support Allows you to enable / disable ACPI (Advanced Con- figuration and Power Interface) 2.0 Support function. Choices: Yes; No ACPI APIC Support Allows you to enable / disable ACPI APIC (Advanced Programmable Interrupt Controller) Support function.
-
Page 65: 4-6.3.7 Usb Configuration
Chapter 4 BIOS Setup 4-6.3.7 USB Configuration 1. Choose “USB Configuration” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for configuration: USB Configuration Help Item USB Configuration Enable USB host Module Version - 2.22.5-7.4 controllers. USB Devices Enabled : None USB Function 8 USB Ports... - Page 66 86SP2/86SP2-L USB Mass Storage Press “Enter” to view its submenu shown below. Device Config USB Mass Storage To select number of seconds POST waits for the Reset Delay USB mass storage device after start unit command. Choices: 10 Sec; 20 Sec; 30 Sec; 40 Sec...
-
Page 67: 4-6.3.8 Frequency/Voltage Control
Chapter 4 BIOS Setup 4-6.3.8 Frequency/Voltage Control 1. Choose “Frequency/Voltage Control” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for configuration: Frequency/Voltage Control Help Item Frequency/Voltage Configuration Press “+”/”-” to select. CPU Linear Frequency Enabled CPU Clock 100MHz Fix AGP/PCI Frequency Disable... -
Page 68: 4-6.3.9 Power Management
86SP2/86SP2-L 4-6.3.9 Power Management 1. Choose “Power Management” in “Advanced BIOS Features” and press <Enter>. The following sub-screen will appear for configuration: Power Management Help Item APM Configuration Enable or disable APM. Power Management/APM Enabled Video Power Down Mode Suspend... - Page 69 Chapter 4 BIOS Setup Power Button Function Allows you to set power Button function. Choices: On/Off (default); Suspend Restore on AC/Power Allows you to set the restore state from AC/Power Loss Loss. Choices: Last State; Power Off (default); Power On Resume on Ring Allows you to enable / disable (default)the Resume on Ring Signal function.
-
Page 70: 4-6.4 Advanced Chipset Features
86SP2/86SP2-L 4-6.4 Advanced Chipset Features Advanced Chipset Features is used to modify the values of chipset buffers. These buffers control the system options. Run the Advanced Chipset Features as follows: 1. Choose “Advanced Chipset Features” from the Main Menu and a list of option will appear: CMOS Setup Utility - Copyright (C) 1985-2002, American Megatrends, Inc. -
Page 71: 4-6.4.1 Northbridge Configuration
Chapter 4 BIOS Setup 4-6.4.1 NorthBridge Configuration Choose “NorthBridge Configuration” in “Advanced Chipset Features” and press <Enter>. The following sub-screen will appear for configuration: NorthBridge Configuration Help Item DRAM Frequency Auto Configure DRAM Timing by SPD Enabled Memory Hole Disabled Init. - Page 72 86SP2/86SP2-L DRAM CAS# Latency With SDRAM Timing by SPD disabled, you can se- lect the SDRAM CAS# (Column Address Strode)la- tency manually. Choices: 2 Clocks; 2.5 Clocks; 3 Clocks DRAM RAS# With SDRAM Timing by SPD disabled, you can se-...
-
Page 73: 4-6.4.2 Southbridge Configuration
Chapter 4 BIOS Setup 4-6.4.2 SouthBridge Configuration 1. Choose “SouthBridge Configuration” in “Advanced Chipset Fea- tures” and press <Enter>. The following sub-screen will appear for configuration: SouthBridge Configuration Help Item OnBoard AC’97 Audio Auto : Move Enter : Select +/- : Values F10: Save Esc: Exit F1: General Help... -
Page 74: 4-6.5 Pci/Pnp Resource Management
86SP2/86SP2-L 4-6.5 PCI/PNP Resource Management PCI/PNP Resource Management allows you to modify the system’s power saving functions. 1. Choose “PCI/PNP Resource Management” from the Main Menu and a screen with a list of options will appear: CMOS Setup Utility - Copyright (C) 1985-2002, American Megatrends, Inc. - Page 75 Chapter 4 BIOS Setup 3. Press <ESC> to return to the Main Menu when you finish setting up all items. The following descriptions are provided as a quick guide. Plug & Play O/S Allows you to configure the PNP devices by BIOS or O/S.
-
Page 76: 4-6.6 Boot Configuration Setup
86SP2/86SP2-L 4-6.6 Boot Configuration Setup Boot Configuration Setup allows you to modify the system’s boot settings. 1. Choose “Boot Configuration Setup” from the Main Menu and a screen with a list of options will appear: CMOS Setup Utility - Copyright (C) 1985-2002, American Megatrends, Inc. -
Page 77: 4-6.6.1 Boot Settings Configuration
Chapter 4 BIOS Setup 4-6.6.1 Boot Settings Configuration Choose “Boot Settings Configuration” in “Boot Configuration Setup” and press <Enter>. The following items will appear for onfiguration: Boot Configuration Setup Help Item Boot Settings Configure Settings Quick Boot Enabled during System Boot. Quiet Boot Disabled AddOn ROM Display Mode... -
Page 78: 4-6.6.2 Boot Device Priority
86SP2/86SP2-L PS/2 Mouse Support Enabled (default), PS/2 mouse is supported. Disabled, PS/2 Mouse is not supported. If “Auto” is set, the system will auto detect the PS/2 Mouse. Wait For ‘F1’ If Error Allows you to hit F1 key when errors occur. -
Page 79: 4-6.7 Boot Security Features
Chapter 4 BIOS Setup 4-6.7 Boot Security Features Boot Security Features allows you to modify the system’s boot security settings. 1. Choose “Boot Security Features” from the Main Menu and a screen with a list of options will appear: CMOS Setup Utility - Copyright (C) 1985-2002, American Megatrends, Inc. Boot Security Features Security Settings Help Item... -
Page 80: 4-6.7.3 Change Supervisor Password
86SP2/86SP2-L 4-6.7.3 Change Supervisor Password This option allows you to set a new Supervisor password for the system: 1. Choose “Change Supervisor Password” in the “BIOS Security Fea- tures” and press <Enter>. Then the following message appears: [ Enter new supervisor password ] 2. -
Page 81: 4-6.7.4 Change User Password
Chapter 4 BIOS Setup 4-6.7.4 Change User Password This option allows you to set a new User password for the system: 1. Choose “Change User Password” in the “BIOS Security Features” and press <Enter>. Then the following message appears: [ Enter New Password ] 2. -
Page 82: 4-6.7.6 Boot Sector Virus Protection
86SP2/86SP2-L Password Check Allows you to set BIOS to check up password with a password prompt at BIOS Setup or whenever re- starting system. This option will appear when you have set Supervisor Password or User Password. Choices: Setup (default); Always 4-6.7.6 Boot Sector Virus Protection... -
Page 83: 4-6.9 Discard Changes ( And Exit )
Chapter 4 BIOS Setup 4-6.9 Discard Changes ( and Exit ) Discard Changes option allows you to exit (or not exit) the Setup Utility without saving the modifications that you have specified. Highlight this option on the Main Menu and press <Enter> and the following message appears: [ Discard Changes (and exit setup?)] [OK]...
Need help?
Do you have a question about the 86SP2 and is the answer not in the manual?
Questions and answers